What size drill for a 7/8-14 tap?

Short answer: 13/16 in drill (0.8125 in, 20.64 mm). About 67% thread. Metric: 20.50 mm (73%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
7/8-14 tapped hole drawn to scale: drill 13/16, thread major diameter 22.23 mm1/2 in
13/16"13/16 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.8125
Millimetres
20.64
Thread
67%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

7/8-14 tap drill sizes from 50% to 85% thread

DrillInchmmThread
53/64"0.828121.0351%
13/16"Recommended0.812520.6467%
51/64"0.796920.2484%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 7/8 screw

FitDrillInchmm
Close59/64"0.921923.42
Normal31/32"0.968824.61
Loose1-3/64"1.046926.59

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

7/8-14 thread dimensions

DimensionInchmm
Major diameter (basic)0.875022.23
Pitch diameter (basic)0.828621.05
Minor diameter, internal (basic)0.797720.26
Pitch (1/14 in)0.07141.81

Unified National Fine (UNF), 14 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

7/8-14 UNF tapPlug tap for through holes, bottoming tap for blind holes
13/16 in drill bit0.8125 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 7/8-14 tap? Use a 13/16 in drill — 0.8125 in (20.64 mm) — for about 67% thread.
7/8-14 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 7/8-14 tap?

13/16 in drill (0.8125 in, 20.64 mm), about 67% thread.

What metric drill can I use for a 7/8-14 tap?

20.50 mm gives about 73% thread.

What is the clearance hole for a 7/8 screw?

Close fit: 59/64 in (0.9219 in); Normal fit: 31/32 in (0.9688 in); Loose fit: 1-3/64 in (1.0469 in).

What does 7/8-14 mean?

7/8 in major diameter with 14 threads per inch, Unified National Fine (UNF).