What size drill for a 5-44 tap?

Short answer: #37 drill (0.1040 in, 2.64 mm). About 71% thread. Closest fractional drill: 7/64 in (53% thread). Metric: 2.60 mm (77%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5-44 tapped hole drawn to scale: drill #37, thread major diameter 3.18 mm1/16 in
#37#37 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1040
Millimetres
2.64
Thread
71%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5-44 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#350.11002.7951%
7/64"0.10942.7853%
#360.10652.7163%
#37Recommended0.10402.6471%
#380.10152.5880%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #5 screw

FitDrillInchmm
Close#290.13603.45
Normal#270.14403.66
Loose#240.15203.86

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5-44 thread dimensions

DimensionInchmm
Major diameter (basic)0.12503.18
Pitch diameter (basic)0.11022.80
Minor diameter, internal (basic)0.10042.55
Pitch (1/44 in)0.02270.58

Unified National Fine (UNF), 44 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5-44 UNF tapPlug tap for through holes, bottoming tap for blind holes
#37 drill bit0.1040 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 5-44 tap? Use a #37 drill — 0.1040 in (2.64 mm) — for about 71% thread. The closest fractional drill is 7/64 in (53% thread).
5-44 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5-44 tap?

#37 drill (0.1040 in, 2.64 mm), about 71% thread. Fractional alternative: 7/64 in (53% thread).

What metric drill can I use for a 5-44 tap?

2.60 mm gives about 77% thread.

What is the clearance hole for a #5 screw?

Close fit: #29 (0.1360 in); Normal fit: #27 (0.1440 in); Loose fit: #24 (0.1520 in).

What does 5-44 mean?

#5 screw size (0.1250 in major diameter) with 44 threads per inch, Unified National Fine (UNF).