What size drill for a 1-1/2-12 tap?

Short answer: 1-27/64 in drill (1.4219 in, 36.12 mm). About 72% thread. Metric: 36.00 mm (76%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-1/2-12 tapped hole drawn to scale: drill 1-27/64, thread major diameter 38.10 mm1 in
1-27/64"1-27/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
1.4219
Millimetres
36.12
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-1/2-12 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-7/16"1.437536.5158%
1-27/64"Recommended1.421936.1272%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-1/2 screw

FitDrillInchmm
Close1-35/64"1.546939.29
Normal1-5/8"1.625041.28
Loose1-3/4"1.750044.45

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-1/2-12 thread dimensions

DimensionInchmm
Major diameter (basic)1.500038.10
Pitch diameter (basic)1.445936.73
Minor diameter, internal (basic)1.409835.81
Pitch (1/12 in)0.08332.12

Unified National Fine (UNF), 12 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-1/2-12 UNF tapPlug tap for through holes, bottoming tap for blind holes
1-27/64 in drill bit1.4219 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1-1/2-12 tap? Use a 1-27/64 in drill — 1.4219 in (36.12 mm) — for about 72% thread.
1-1/2-12 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-1/2-12 tap?

1-27/64 in drill (1.4219 in, 36.12 mm), about 72% thread.

What metric drill can I use for a 1-1/2-12 tap?

36.00 mm gives about 76% thread.

What is the clearance hole for a 1-1/2 screw?

Close fit: 1-35/64 in (1.5469 in); Normal fit: 1-5/8 in (1.6250 in); Loose fit: 1-3/4 in (1.7500 in).

What does 1-1/2-12 mean?

1-1/2 in major diameter with 12 threads per inch, Unified National Fine (UNF).