What size drill for a 3-56 tap?

Short answer: #45 drill (0.0820 in, 2.08 mm). About 73% thread. Closest fractional drill: 5/64 in (90% thread). Metric: 2.10 mm (70%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
3-56 tapped hole drawn to scale: drill #45, thread major diameter 2.51 mm1/16 in
#45#45 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.0820
Millimetres
2.08
Thread
73%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

3-56 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#440.08602.1856%
#45Recommended0.08202.0873%
#460.08102.0678%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #3 screw

FitDrillInchmm
Close7/64"0.10942.78
Normal#320.11602.95
Loose1/8"0.12503.18

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

3-56 thread dimensions

DimensionInchmm
Major diameter (basic)0.09902.51
Pitch diameter (basic)0.08742.22
Minor diameter, internal (basic)0.07972.02
Pitch (1/56 in)0.01790.45

Unified National Fine (UNF), 56 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

3-56 UNF tapPlug tap for through holes, bottoming tap for blind holes
#45 drill bit0.0820 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 3-56 tap? Use a #45 drill — 0.0820 in (2.08 mm) — for about 73% thread. The closest fractional drill is 5/64 in (90% thread).
3-56 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 3-56 tap?

#45 drill (0.0820 in, 2.08 mm), about 73% thread. Fractional alternative: 5/64 in (90% thread).

What metric drill can I use for a 3-56 tap?

2.10 mm gives about 70% thread.

What is the clearance hole for a #3 screw?

Close fit: 7/64 in (0.1094 in); Normal fit: #32 (0.1160 in); Loose fit: 1/8 in (0.1250 in).

What does 3-56 mean?

#3 screw size (0.0990 in major diameter) with 56 threads per inch, Unified National Fine (UNF).