What size drill for a 1-12 tap?

Short answer: 59/64 in drill (0.9219 in, 23.42 mm). About 72% thread. Metric: 23.50 mm (69%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-12 tapped hole drawn to scale: drill 59/64, thread major diameter 25.40 mm1/2 in
59/64"59/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.9219
Millimetres
23.42
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-12 tap drill sizes from 50% to 85% thread

DrillInchmmThread
15/16"0.937523.8158%
59/64"Recommended0.921923.4272%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1 screw

FitDrillInchmm
Close1-3/64"1.046926.59
Normal1-7/64"1.109428.18
Loose1-3/16"1.187530.16

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-12 thread dimensions

DimensionInchmm
Major diameter (basic)1.000025.40
Pitch diameter (basic)0.945924.03
Minor diameter, internal (basic)0.909823.11
Pitch (1/12 in)0.08332.12

Unified National Fine (UNF), 12 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-12 UNF tapPlug tap for through holes, bottoming tap for blind holes
59/64 in drill bit0.9219 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1-12 tap? Use a 59/64 in drill — 0.9219 in (23.42 mm) — for about 72% thread.
1-12 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-12 tap?

59/64 in drill (0.9219 in, 23.42 mm), about 72% thread.

What metric drill can I use for a 1-12 tap?

23.50 mm gives about 69% thread.

What is the clearance hole for a 1 screw?

Close fit: 1-3/64 in (1.0469 in); Normal fit: 1-7/64 in (1.1094 in); Loose fit: 1-3/16 in (1.1875 in).

What does 1-12 mean?

1 in major diameter with 12 threads per inch, Unified National Fine (UNF).