What size drill for a 9/16-18 tap?

Short answer: 33/64 in drill (0.5156 in, 13.10 mm). About 65% thread. Metric: 12.90 mm (76%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
9/16-18 tapped hole drawn to scale: drill 33/64, thread major diameter 14.29 mm1/4 in
33/64"33/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.5156
Millimetres
13.10
Thread
65%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

9/16-18 tap drill sizes from 50% to 85% thread

DrillInchmmThread
33/64"Recommended0.515613.1065%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 9/16 screw

FitDrillInchmm
Close39/64"0.609415.48
Normal5/8"0.625015.88
Loose43/64"0.671917.07

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

9/16-18 thread dimensions

DimensionInchmm
Major diameter (basic)0.562514.29
Pitch diameter (basic)0.526413.37
Minor diameter, internal (basic)0.502412.76
Pitch (1/18 in)0.05561.41

Unified National Fine (UNF), 18 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

9/16-18 UNF tapPlug tap for through holes, bottoming tap for blind holes
33/64 in drill bit0.5156 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 9/16-18 tap? Use a 33/64 in drill — 0.5156 in (13.10 mm) — for about 65% thread.
9/16-18 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 9/16-18 tap?

33/64 in drill (0.5156 in, 13.10 mm), about 65% thread.

What metric drill can I use for a 9/16-18 tap?

12.90 mm gives about 76% thread.

What is the clearance hole for a 9/16 screw?

Close fit: 39/64 in (0.6094 in); Normal fit: 5/8 in (0.6250 in); Loose fit: 43/64 in (0.6719 in).

What does 9/16-18 mean?

9/16 in major diameter with 18 threads per inch, Unified National Fine (UNF).