What size drill for a 7/16-20 tap?

Short answer: 25/64 in drill (0.3906 in, 9.92 mm). About 72% thread. Metric: 9.90 mm (73%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
7/16-20 tapped hole drawn to scale: drill 25/64, thread major diameter 11.11 mm1/4 in
25/64"25/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.3906
Millimetres
9.92
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

7/16-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
Y0.404010.2652%
X0.397010.0862%
25/64"Recommended0.39069.9272%
W0.38609.8079%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 7/16 screw

FitDrillInchmm
Close15/32"0.468811.91
Normal1/2"0.500012.70
Loose17/32"0.531313.49

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

7/16-20 thread dimensions

DimensionInchmm
Major diameter (basic)0.437511.11
Pitch diameter (basic)0.405010.29
Minor diameter, internal (basic)0.38349.74
Pitch (1/20 in)0.05001.27

Unified National Fine (UNF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

7/16-20 UNF tapPlug tap for through holes, bottoming tap for blind holes
25/64 in drill bit0.3906 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 7/16-20 tap? Use a 25/64 in drill — 0.3906 in (9.92 mm) — for about 72% thread.
7/16-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 7/16-20 tap?

25/64 in drill (0.3906 in, 9.92 mm), about 72% thread.

What metric drill can I use for a 7/16-20 tap?

9.90 mm gives about 73% thread.

What is the clearance hole for a 7/16 screw?

Close fit: 15/32 in (0.4688 in); Normal fit: 1/2 in (0.5000 in); Loose fit: 17/32 in (0.5313 in).

What does 7/16-20 mean?

7/16 in major diameter with 20 threads per inch, Unified National Fine (UNF).