What size drill for a 5/16-24 tap?

Short answer: letter I drill (0.2720 in, 6.91 mm). About 75% thread. Closest fractional drill: 17/64 in (87% thread). Metric: 6.90 mm (75%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5/16-24 tapped hole drawn to scale: drill I, thread major diameter 7.94 mm1/4 in
Iletter I drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2720
Millimetres
6.91
Thread
75%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5/16-24 tap drill sizes from 50% to 85% thread

DrillInchmmThread
9/32"0.28137.1458%
K0.28107.1458%
J0.27707.0466%
IRecommended0.27206.9175%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 5/16 screw

FitDrillInchmm
CloseQ0.33208.43
NormalT0.35809.09
Loose25/64"0.39069.92

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5/16-24 thread dimensions

DimensionInchmm
Major diameter (basic)0.31257.94
Pitch diameter (basic)0.28547.25
Minor diameter, internal (basic)0.26746.79
Pitch (1/24 in)0.04171.06

Unified National Fine (UNF), 24 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5/16-24 UNF tapPlug tap for through holes, bottoming tap for blind holes
I drill bit0.2720 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 5/16-24 tap? Use a letter I drill — 0.2720 in (6.91 mm) — for about 75% thread. The closest fractional drill is 17/64 in (87% thread).
5/16-24 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5/16-24 tap?

letter I drill (0.2720 in, 6.91 mm), about 75% thread. Fractional alternative: 17/64 in (87% thread).

What metric drill can I use for a 5/16-24 tap?

6.90 mm gives about 75% thread.

What is the clearance hole for a 5/16 screw?

Close fit: Q (0.3320 in); Normal fit: T (0.3580 in); Loose fit: 25/64 in (0.3906 in).

What does 5/16-24 mean?

5/16 in major diameter with 24 threads per inch, Unified National Fine (UNF).