What size drill for a 12-28 tap?

Short answer: #14 drill (0.1820 in, 4.62 mm). About 73% thread. Closest fractional drill: 3/16 in (61% thread). Metric: 4.60 mm (75%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
12-28 tapped hole drawn to scale: drill #14, thread major diameter 5.49 mm1/8 in
#14#14 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1820
Millimetres
4.62
Thread
73%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

12-28 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#110.19104.8554%
#120.18904.8058%
3/16"0.18754.7661%
#130.18504.7067%
#14Recommended0.18204.6273%
#150.18004.5778%
#160.17704.5084%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #12 screw

FitDrillInchmm
CloseA0.23405.94
NormalB0.23806.05
LooseF0.25706.53

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

12-28 thread dimensions

DimensionInchmm
Major diameter (basic)0.21605.49
Pitch diameter (basic)0.19284.90
Minor diameter, internal (basic)0.17734.50
Pitch (1/28 in)0.03570.91

Unified National Fine (UNF), 28 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

12-28 UNF tapPlug tap for through holes, bottoming tap for blind holes
#14 drill bit0.1820 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 12-28 tap? Use a #14 drill — 0.1820 in (4.62 mm) — for about 73% thread. The closest fractional drill is 3/16 in (61% thread).
12-28 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 12-28 tap?

#14 drill (0.1820 in, 4.62 mm), about 73% thread. Fractional alternative: 3/16 in (61% thread).

What metric drill can I use for a 12-28 tap?

4.60 mm gives about 75% thread.

What is the clearance hole for a #12 screw?

Close fit: A (0.2340 in); Normal fit: B (0.2380 in); Loose fit: F (0.2570 in).

What does 12-28 mean?

#12 screw size (0.2160 in major diameter) with 28 threads per inch, Unified National Fine (UNF).