What size drill for a 5/8-18 tap?

Short answer: 37/64 in drill (0.5781 in, 14.68 mm). About 65% thread. Metric: 14.50 mm (75%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5/8-18 tapped hole drawn to scale: drill 37/64, thread major diameter 15.88 mm1/2 in
37/64"37/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.5781
Millimetres
14.68
Thread
65%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5/8-18 tap drill sizes from 50% to 85% thread

DrillInchmmThread
37/64"Recommended0.578114.6865%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 5/8 screw

FitDrillInchmm
Close43/64"0.671917.07
Normal11/16"0.687517.46
Loose47/64"0.734418.65

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5/8-18 thread dimensions

DimensionInchmm
Major diameter (basic)0.625015.88
Pitch diameter (basic)0.588914.96
Minor diameter, internal (basic)0.564914.35
Pitch (1/18 in)0.05561.41

Unified National Fine (UNF), 18 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5/8-18 UNF tapPlug tap for through holes, bottoming tap for blind holes
37/64 in drill bit0.5781 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 5/8-18 tap? Use a 37/64 in drill — 0.5781 in (14.68 mm) — for about 65% thread.
5/8-18 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5/8-18 tap?

37/64 in drill (0.5781 in, 14.68 mm), about 65% thread.

What metric drill can I use for a 5/8-18 tap?

14.50 mm gives about 75% thread.

What is the clearance hole for a 5/8 screw?

Close fit: 43/64 in (0.6719 in); Normal fit: 11/16 in (0.6875 in); Loose fit: 47/64 in (0.7344 in).

What does 5/8-18 mean?

5/8 in major diameter with 18 threads per inch, Unified National Fine (UNF).