What size drill for a 1-1/4-12 tap?

Short answer: 1-11/64 in drill (1.1719 in, 29.77 mm). About 72% thread. Metric: 29.50 mm (82%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-1/4-12 tapped hole drawn to scale: drill 1-11/64, thread major diameter 31.75 mm1 in
1-11/64"1-11/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
1.1719
Millimetres
29.77
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-1/4-12 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-3/16"1.187530.1658%
1-11/64"Recommended1.171929.7772%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-1/4 screw

FitDrillInchmm
Close1-19/64"1.296932.94
Normal1-3/8"1.375034.93
Loose1-29/64"1.453136.91

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-1/4-12 thread dimensions

DimensionInchmm
Major diameter (basic)1.250031.75
Pitch diameter (basic)1.195930.38
Minor diameter, internal (basic)1.159829.46
Pitch (1/12 in)0.08332.12

Unified National Fine (UNF), 12 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-1/4-12 UNF tapPlug tap for through holes, bottoming tap for blind holes
1-11/64 in drill bit1.1719 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1-1/4-12 tap? Use a 1-11/64 in drill — 1.1719 in (29.77 mm) — for about 72% thread.
1-1/4-12 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-1/4-12 tap?

1-11/64 in drill (1.1719 in, 29.77 mm), about 72% thread.

What metric drill can I use for a 1-1/4-12 tap?

29.50 mm gives about 82% thread.

What is the clearance hole for a 1-1/4 screw?

Close fit: 1-19/64 in (1.2969 in); Normal fit: 1-3/8 in (1.3750 in); Loose fit: 1-29/64 in (1.4531 in).

What does 1-1/4-12 mean?

1-1/4 in major diameter with 12 threads per inch, Unified National Fine (UNF).