What size drill for a 3/8-24 tap?

Short answer: letter Q drill (0.3320 in, 8.43 mm). About 79% thread. Closest fractional drill: 21/64 in (87% thread). Metric: 8.50 mm (75%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
3/8-24 tapped hole drawn to scale: drill Q, thread major diameter 9.53 mm1/4 in
Qletter Q drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.3320
Millimetres
8.43
Thread
79%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

3/8-24 tap drill sizes from 50% to 85% thread

DrillInchmmThread
11/32"0.34388.7358%
R0.33908.6167%
QRecommended0.33208.4379%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 3/8 screw

FitDrillInchmm
CloseX0.397010.08
Normal27/64"0.421910.72
Loose15/32"0.468811.91

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

3/8-24 thread dimensions

DimensionInchmm
Major diameter (basic)0.37509.53
Pitch diameter (basic)0.34798.84
Minor diameter, internal (basic)0.32998.38
Pitch (1/24 in)0.04171.06

Unified National Fine (UNF), 24 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

3/8-24 UNF tapPlug tap for through holes, bottoming tap for blind holes
Q drill bit0.3320 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 3/8-24 tap? Use a letter Q drill — 0.3320 in (8.43 mm) — for about 79% thread. The closest fractional drill is 21/64 in (87% thread).
3/8-24 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 3/8-24 tap?

letter Q drill (0.3320 in, 8.43 mm), about 79% thread. Fractional alternative: 21/64 in (87% thread).

What metric drill can I use for a 3/8-24 tap?

8.50 mm gives about 75% thread.

What is the clearance hole for a 3/8 screw?

Close fit: X (0.3970 in); Normal fit: 27/64 in (0.4219 in); Loose fit: 15/32 in (0.4688 in).

What does 3/8-24 mean?

3/8 in major diameter with 24 threads per inch, Unified National Fine (UNF).