What size drill for a 1/2-20 tap?

Short answer: 29/64 in drill (0.4531 in, 11.51 mm). About 72% thread. Metric: 11.50 mm (73%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1/2-20 tapped hole drawn to scale: drill 29/64, thread major diameter 12.70 mm1/4 in
29/64"29/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.4531
Millimetres
11.51
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1/2-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
29/64"Recommended0.453111.5172%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1/2 screw

FitDrillInchmm
Close35/64"0.546913.89
Normal9/16"0.562514.29
Loose39/64"0.609415.48

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1/2-20 thread dimensions

DimensionInchmm
Major diameter (basic)0.500012.70
Pitch diameter (basic)0.467511.88
Minor diameter, internal (basic)0.445911.33
Pitch (1/20 in)0.05001.27

Unified National Fine (UNF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1/2-20 UNF tapPlug tap for through holes, bottoming tap for blind holes
29/64 in drill bit0.4531 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1/2-20 tap? Use a 29/64 in drill — 0.4531 in (11.51 mm) — for about 72% thread.
1/2-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1/2-20 tap?

29/64 in drill (0.4531 in, 11.51 mm), about 72% thread.

What metric drill can I use for a 1/2-20 tap?

11.50 mm gives about 73% thread.

What is the clearance hole for a 1/2 screw?

Close fit: 35/64 in (0.5469 in); Normal fit: 9/16 in (0.5625 in); Loose fit: 39/64 in (0.6094 in).

What does 1/2-20 mean?

1/2 in major diameter with 20 threads per inch, Unified National Fine (UNF).