What size drill for a 6-40 tap?

Short answer: #33 drill (0.1130 in, 2.87 mm). About 77% thread. Closest fractional drill: 7/64 in (88% thread). Metric: 2.90 mm (73%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
6-40 tapped hole drawn to scale: drill #33, thread major diameter 3.51 mm1/16 in
#33#33 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1130
Millimetres
2.87
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

6-40 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#310.12003.0555%
#320.11602.9568%
#33Recommended0.11302.8777%
#340.11102.8283%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #6 screw

FitDrillInchmm
Close#260.14703.73
Normal#230.15403.91
Loose#190.16604.22

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

6-40 thread dimensions

DimensionInchmm
Major diameter (basic)0.13803.51
Pitch diameter (basic)0.12183.09
Minor diameter, internal (basic)0.11092.82
Pitch (1/40 in)0.02500.64

Unified National Fine (UNF), 40 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

6-40 UNF tapPlug tap for through holes, bottoming tap for blind holes
#33 drill bit0.1130 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 6-40 tap? Use a #33 drill — 0.1130 in (2.87 mm) — for about 77% thread. The closest fractional drill is 7/64 in (88% thread).
6-40 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 6-40 tap?

#33 drill (0.1130 in, 2.87 mm), about 77% thread. Fractional alternative: 7/64 in (88% thread).

What metric drill can I use for a 6-40 tap?

2.90 mm gives about 73% thread.

What is the clearance hole for a #6 screw?

Close fit: #26 (0.1470 in); Normal fit: #23 (0.1540 in); Loose fit: #19 (0.1660 in).

What does 6-40 mean?

#6 screw size (0.1380 in major diameter) with 40 threads per inch, Unified National Fine (UNF).