What size drill for a 2-64 tap?

Short answer: #50 drill (0.0700 in, 1.78 mm). About 79% thread. Closest fractional drill: 5/64 in (39% thread). Metric: 1.80 mm (75%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
2-64 tapped hole drawn to scale: drill #50, thread major diameter 2.18 mm1/16 in
#50#50 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.0700
Millimetres
1.78
Thread
79%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

2-64 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#490.07301.8564%
#50Recommended0.07001.7879%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #2 screw

FitDrillInchmm
Close#410.09602.44
Normal#370.10402.64
Loose#350.11002.79

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

2-64 thread dimensions

DimensionInchmm
Major diameter (basic)0.08602.18
Pitch diameter (basic)0.07591.93
Minor diameter, internal (basic)0.06911.75
Pitch (1/64 in)0.01560.40

Unified National Fine (UNF), 64 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

2-64 UNF tapPlug tap for through holes, bottoming tap for blind holes
#50 drill bit0.0700 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 2-64 tap? Use a #50 drill — 0.0700 in (1.78 mm) — for about 79% thread. The closest fractional drill is 5/64 in (39% thread).
2-64 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 2-64 tap?

#50 drill (0.0700 in, 1.78 mm), about 79% thread. Fractional alternative: 5/64 in (39% thread).

What metric drill can I use for a 2-64 tap?

1.80 mm gives about 75% thread.

What is the clearance hole for a #2 screw?

Close fit: #41 (0.0960 in); Normal fit: #37 (0.1040 in); Loose fit: #35 (0.1100 in).

What does 2-64 mean?

#2 screw size (0.0860 in major diameter) with 64 threads per inch, Unified National Fine (UNF).