Tap drill calculator
For threads that are not in the chart. Enter the major diameter and pitch; the calculator shows the theoretical drill and the nearest standard drills with the percent of thread each one gives.
Your thread
Numbered screws: diameter = 0.060 + 0.013 × N in (#10 = 0.190 in). Drill = D − 1.299 × pitch × % ÷ 100.
Theoretical drill
–| Drill set | Nearest | Inch | Thread |
|---|
Questions
Which percent of thread should I use?
75% is the usual chart value for most metals. Lower percentages (60–70%) make a slightly bigger hole and reduce tapping torque in hard or stainless steel.
How is the metric tap drill calculated?
Major diameter minus pitch (D − P), which gives about 77% thread by the US chart convention.
https://whatsizeis.com/calculators/tap-drill/