What size drill for a 1-72 tap?

Short answer: #53 drill (0.0595 in, 1.51 mm). About 75% thread. Closest fractional drill: 1/16 in (58% thread). Metric: 1.50 mm (77%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-72 tapped hole drawn to scale: drill #53, thread major diameter 1.85 mm1/32 in
#53#53 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.0595
Millimetres
1.51
Thread
75%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-72 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#520.06351.6153%
1/16"0.06251.5958%
#53Recommended0.05951.5175%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #1 screw

FitDrillInchmm
Close#460.08102.06
Normal#440.08602.18
Loose#410.09602.44

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-72 thread dimensions

DimensionInchmm
Major diameter (basic)0.07301.85
Pitch diameter (basic)0.06401.63
Minor diameter, internal (basic)0.05801.47
Pitch (1/72 in)0.01390.35

Unified National Fine (UNF), 72 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-72 UNF tapPlug tap for through holes, bottoming tap for blind holes
#53 drill bit0.0595 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1-72 tap? Use a #53 drill — 0.0595 in (1.51 mm) — for about 75% thread. The closest fractional drill is 1/16 in (58% thread).
1-72 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-72 tap?

#53 drill (0.0595 in, 1.51 mm), about 75% thread. Fractional alternative: 1/16 in (58% thread).

What metric drill can I use for a 1-72 tap?

1.50 mm gives about 77% thread.

What is the clearance hole for a #1 screw?

Close fit: #46 (0.0810 in); Normal fit: #44 (0.0860 in); Loose fit: #41 (0.0960 in).

What does 1-72 mean?

#1 screw size (0.0730 in major diameter) with 72 threads per inch, Unified National Fine (UNF).