What size drill for a 7/8-20 tap?

Short answer: 53/64 in drill (0.8281 in, 21.03 mm). About 72% thread. Metric: 21.00 mm (74%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
7/8-20 tapped hole drawn to scale: drill 53/64, thread major diameter 22.23 mm1/2 in
53/64"53/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.8281
Millimetres
21.03
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

7/8-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
53/64"Recommended0.828121.0372%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 7/8 screw

FitDrillInchmm
Close59/64"0.921923.42
Normal31/32"0.968824.61
Loose1-3/64"1.046926.59

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

7/8-20 thread dimensions

DimensionInchmm
Major diameter (basic)0.875022.23
Pitch diameter (basic)0.842521.40
Minor diameter, internal (basic)0.820920.85
Pitch (1/20 in)0.05001.27

Unified National Extra Fine (UNEF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

7/8-20 UNEF tapPlug tap for through holes, bottoming tap for blind holes
53/64 in drill bit0.8281 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 7/8-20 tap? Use a 53/64 in drill — 0.8281 in (21.03 mm) — for about 72% thread.
7/8-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 7/8-20 tap?

53/64 in drill (0.8281 in, 21.03 mm), about 72% thread.

What metric drill can I use for a 7/8-20 tap?

21.00 mm gives about 74% thread.

What is the clearance hole for a 7/8 screw?

Close fit: 59/64 in (0.9219 in); Normal fit: 31/32 in (0.9688 in); Loose fit: 1-3/64 in (1.0469 in).

What does 7/8-20 mean?

7/8 in major diameter with 20 threads per inch, Unified National Extra Fine (UNEF).