What size drill for a 1-3/8-12 tap?

Short answer: 1-19/64 in drill (1.2969 in, 32.94 mm). About 72% thread. Metric: 33.00 mm (70%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-3/8-12 tapped hole drawn to scale: drill 1-19/64, thread major diameter 34.93 mm1 in
1-19/64"1-19/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
1.2969
Millimetres
32.94
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-3/8-12 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-5/16"1.312533.3458%
1-19/64"Recommended1.296932.9472%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-3/8 screw

FitDrillInchmm
Close1-27/64"1.421936.12
Normal1-1/2"1.500038.10
Loose1-39/64"1.609440.88

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-3/8-12 thread dimensions

DimensionInchmm
Major diameter (basic)1.375034.93
Pitch diameter (basic)1.320933.55
Minor diameter, internal (basic)1.284832.63
Pitch (1/12 in)0.08332.12

Unified National Fine (UNF), 12 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-3/8-12 UNF tapPlug tap for through holes, bottoming tap for blind holes
1-19/64 in drill bit1.2969 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1-3/8-12 tap? Use a 1-19/64 in drill — 1.2969 in (32.94 mm) — for about 72% thread.
1-3/8-12 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-3/8-12 tap?

1-19/64 in drill (1.2969 in, 32.94 mm), about 72% thread.

What metric drill can I use for a 1-3/8-12 tap?

33.00 mm gives about 70% thread.

What is the clearance hole for a 1-3/8 screw?

Close fit: 1-27/64 in (1.4219 in); Normal fit: 1-1/2 in (1.5000 in); Loose fit: 1-39/64 in (1.6094 in).

What does 1-3/8-12 mean?

1-3/8 in major diameter with 12 threads per inch, Unified National Fine (UNF).