What size drill for a 1/4-28 tap?

Short answer: #3 drill (0.2130 in, 5.41 mm). About 80% thread. Closest fractional drill: 7/32 in (67% thread). Metric: 5.50 mm (72%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1/4-28 tapped hole drawn to scale: drill #3, thread major diameter 6.35 mm1/8 in
#3#3 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2130
Millimetres
5.41
Thread
80%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1/4-28 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#20.22105.6163%
7/32"0.21885.5667%
#3Recommended0.21305.4180%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1/4 screw

FitDrillInchmm
CloseH0.26606.76
NormalJ0.27707.04
Loose19/64"0.29697.54

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1/4-28 thread dimensions

DimensionInchmm
Major diameter (basic)0.25006.35
Pitch diameter (basic)0.22685.76
Minor diameter, internal (basic)0.21135.37
Pitch (1/28 in)0.03570.91

Unified National Fine (UNF), 28 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1/4-28 UNF tapPlug tap for through holes, bottoming tap for blind holes
#3 drill bit0.2130 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 1/4-28 tap? Use a #3 drill — 0.2130 in (5.41 mm) — for about 80% thread. The closest fractional drill is 7/32 in (67% thread).
1/4-28 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1/4-28 tap?

#3 drill (0.2130 in, 5.41 mm), about 80% thread. Fractional alternative: 7/32 in (67% thread).

What metric drill can I use for a 1/4-28 tap?

5.50 mm gives about 72% thread.

What is the clearance hole for a 1/4 screw?

Close fit: H (0.2660 in); Normal fit: J (0.2770 in); Loose fit: 19/64 in (0.2969 in).

What does 1/4-28 mean?

1/4 in major diameter with 28 threads per inch, Unified National Fine (UNF).