What size drill for a 4-48 tap?

Short answer: #42 drill (0.0935 in, 2.37 mm). About 68% thread. Closest fractional drill: 3/32 in (67% thread). Metric: 2.30 mm (79%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
4-48 tapped hole drawn to scale: drill #42, thread major diameter 2.84 mm1/16 in
#42#42 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.0935
Millimetres
2.37
Thread
68%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

4-48 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#400.09802.4952%
#410.09602.4459%
3/32"0.09382.3867%
#42Recommended0.09352.3768%
#430.08902.2685%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #4 screw

FitDrillInchmm
Close#310.12003.05
Normal#300.12853.26
Loose#290.13603.45

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

4-48 thread dimensions

DimensionInchmm
Major diameter (basic)0.11202.84
Pitch diameter (basic)0.09852.50
Minor diameter, internal (basic)0.08942.27
Pitch (1/48 in)0.02080.53

Unified National Fine (UNF), 48 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

4-48 UNF tapPlug tap for through holes, bottoming tap for blind holes
#42 drill bit0.0935 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNF tap drill sizes

What size drill for a 4-48 tap? Use a #42 drill — 0.0935 in (2.37 mm) — for about 68% thread. The closest fractional drill is 3/32 in (67% thread).
4-48 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 4-48 tap?

#42 drill (0.0935 in, 2.37 mm), about 68% thread. Fractional alternative: 3/32 in (67% thread).

What metric drill can I use for a 4-48 tap?

2.30 mm gives about 79% thread.

What is the clearance hole for a #4 screw?

Close fit: #31 (0.1200 in); Normal fit: #30 (0.1285 in); Loose fit: #29 (0.1360 in).

What does 4-48 mean?

#4 screw size (0.1120 in major diameter) with 48 threads per inch, Unified National Fine (UNF).