What size drill for a 7/8-9 tap?

Short answer: 49/64 in drill (0.7656 in, 19.45 mm). About 76% thread. Metric: 19.50 mm (74%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
7/8-9 tapped hole drawn to scale: drill 49/64, thread major diameter 22.23 mm1/2 in
49/64"49/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.7656
Millimetres
19.45
Thread
76%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

7/8-9 tap drill sizes from 50% to 85% thread

DrillInchmmThread
51/64"0.796920.2454%
25/32"0.781319.8465%
49/64"Recommended0.765619.4576%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 7/8 screw

FitDrillInchmm
Close59/64"0.921923.42
Normal31/32"0.968824.61
Loose1-3/64"1.046926.59

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

7/8-9 thread dimensions

DimensionInchmm
Major diameter (basic)0.875022.23
Pitch diameter (basic)0.802820.39
Minor diameter, internal (basic)0.754719.17
Pitch (1/9 in)0.11112.82

Unified National Coarse (UNC), 9 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

7/8-9 UNC tapPlug tap for through holes, bottoming tap for blind holes
49/64 in drill bit0.7656 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 7/8-9 tap? Use a 49/64 in drill — 0.7656 in (19.45 mm) — for about 76% thread.
7/8-9 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 7/8-9 tap?

49/64 in drill (0.7656 in, 19.45 mm), about 76% thread.

What metric drill can I use for a 7/8-9 tap?

19.50 mm gives about 74% thread.

What is the clearance hole for a 7/8 screw?

Close fit: 59/64 in (0.9219 in); Normal fit: 31/32 in (0.9688 in); Loose fit: 1-3/64 in (1.0469 in).

What does 7/8-9 mean?

7/8 in major diameter with 9 threads per inch, Unified National Coarse (UNC).