What is a 53/64 inch drill bit in mm?
Short answer: 0.8281 in = 21.03 mm. Closest metric drill: 21 mm (−0.0014 in). It is the tap drill for 7/8-20 UNEF.
Fractional drill
53/64"0.8281 in · 21.03 mm
Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.
Drill sizes close to 53/64"
| Drill | Type | Inch | mm | vs 53/64" |
|---|---|---|---|---|
| 25/32" | fractional | 0.7813 | 19.84 | −0.0469 |
| 20 mm | metric | 0.7874 | 20.00 | −0.0407 |
| 51/64" | fractional | 0.7969 | 20.24 | −0.0313 |
| 20.5 mm | metric | 0.8071 | 20.50 | −0.0210 |
| 13/16" | fractional | 0.8125 | 20.64 | −0.0156 |
| 21 mm | metric | 0.8268 | 21.00 | −0.0014 |
| 53/64" | fractional | 0.8281 | 21.03 | – |
| 27/32" | fractional | 0.8438 | 21.43 | +0.0156 |
| 55/64" | fractional | 0.8594 | 21.83 | +0.0313 |
| 22 mm | metric | 0.8661 | 22.00 | +0.0380 |
| 7/8" | fractional | 0.8750 | 22.23 | +0.0469 |
| 22.5 mm | metric | 0.8858 | 22.50 | +0.0577 |
| 57/64" | fractional | 0.8906 | 22.62 | +0.0625 |
Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate
What a 53/64" drill is used for
What you'll need
53/64 in jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Fractional drill set (1/64 in steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal
More fractional drills

Questions
What is a 53/64 in drill in inches?
0.8281 in.
What is a 53/64 in drill in mm?
21.03 mm (0.8281 × 25.4).
What metric drill is closest to 53/64 in?
21 mm drill (0.8268 in, 21.00 mm), smaller by 0.0014 in.
What tap uses a 53/64 in drill?
7/8-20 UNEF (recommended tap drill).
https://whatsizeis.com/drill/53-64-inch/