What size drill for an M27 tap?

Short answer: 24 mm drill (0.9449 in, 24.00 mm). That is D − P (27 − 3 mm) and gives about 77% thread. Closest inch drill: 15/16 in (0.9375 in, 82% thread).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
M27 tapped hole drawn to scale: drill 24 mm, thread major diameter 27.00 mm20 mm
24mm24 mm drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.9449
Millimetres
24.00
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, metric drills

M27 tap drill sizes from 50% to 85% thread

DrillInchmmThread
25 mm0.984325.0051%
24.5 mm0.964624.5064%
24 mmRecommended0.944924.0077%

Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate

Clearance hole for an M27 bolt

FitDrillInchmm
Close28 mm1.102428.00
Normal30 mm1.181130.00
Loose32 mm1.259832.00

ISO 273: fine (close), medium (normal) and coarse (loose) series.

M27 thread dimensions

DimensionInchmm
Major diameter (basic)1.063027.00
Pitch diameter (basic)0.986325.05
Minor diameter, internal (basic)0.935123.75
Pitch0.11813.00

Metric coarse (ISO), 3 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.

Same size, other threads

What you'll need

M27 x 3 tapPlug tap for through holes, bottoming tap for blind holes
24 mm drill bit0.9449 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other metric tap drill sizes

What size drill for an M27 tap? Use a 24 mm drill for an M27 x 3 tap (77% thread). The closest inch drill is 15/16 (0.9375 in, 82% thread).
M27 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for an M27 tap?

24.00 mm (0.9449 in). That is the major diameter minus the pitch (27 − 3 mm) and gives about 77% thread.

Can I use an inch drill for an M27 tap?

Yes: 15/16 in drill (0.9375 in, 23.81 mm) gives about 82% thread.

What is the clearance hole for an M27 bolt?

ISO 273: close fit 28.00 mm, normal fit 30.00 mm, loose fit 32.00 mm.

What does M27 x 3 mean?

A 27 mm nominal diameter ISO metric thread with a 3 mm pitch (coarse series).