What is a 28 mm drill bit in inches?

Short answer: 1.1024 in = 28.00 mm. Closest fractional drill: 1-7/64 in (+0.0070 in). It is the tap drill for M30 x 2.

Metric drill

28mm1.1024 in · 28.00 mm
28 mm drill bit (28.00 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-7/64"
+0.0070 in

Drill sizes close to 28 mm

DrillTypeInchmmvs 28 mm
31/32"fractional0.968824.61−0.1336
25 mmmetric0.984325.00−0.1181
63/64"fractional0.984425.00−0.1180
1"fractional1.000025.40−0.1024
25.5 mmmetric1.003925.50−0.0984
26.5 mmmetric1.043326.50−0.0591
28 mmmetric1.102428.00–
28.5 mmmetric1.122028.50+0.0197
29 mmmetric1.141729.00+0.0394
29.5 mmmetric1.161429.50+0.0591
31 mmmetric1.220531.00+0.1181
32 mmmetric1.259832.00+0.1575
34.5 mmmetric1.358334.50+0.2559

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 28 mm drill is used for

What you'll need

28 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 28 mm drill bit in inches? 28 mm drill = 1.1024 in = 28.00 mm. Closest fractional drill: 1-7/64 in (+0.0070 in). It is the tap drill for M30 x 2.
28 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 28 mm in inches?

28 mm = 1.1024 in (28.00 ÷ 25.4).

What fractional drill is closest to 28 mm?

1-7/64 in drill (1.1094 in, 28.18 mm), larger by 0.0070 in.

What tap uses a 28 mm drill?

M30 x 2 (recommended tap drill).