What size drill for an M1.4 tap?
Short answer: 1.1 mm drill (0.0433 in, 1.10 mm). That is D − P (1.4 − 0.3 mm) and gives about 77% thread. Closest inch drill: #57 (0.0430 in, 79% thread).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
M1.4 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| 1.2 mm | 0.0472 | 1.20 | 51% |
| 1.15 mm | 0.0453 | 1.15 | 64% |
| 1.1 mmRecommended | 0.0433 | 1.10 | 77% |
Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate
Clearance hole for an M1.4 bolt
ISO 273: fine (close), medium (normal) and coarse (loose) series.
M1.4 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 0.0551 | 1.40 |
| Pitch diameter (basic) | 0.0474 | 1.21 |
| Minor diameter, internal (basic) | 0.0423 | 1.08 |
| Pitch | 0.0118 | 0.30 |
Metric coarse (ISO), 0.3 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.
What you'll need
Other metric tap drill sizes

Questions
What size drill bit for an M1.4 tap?
1.10 mm (0.0433 in). That is the major diameter minus the pitch (1.4 − 0.3 mm) and gives about 77% thread.
Can I use an inch drill for an M1.4 tap?
Yes: #57 drill (0.0430 in, 1.09 mm) gives about 79% thread.
What is the clearance hole for an M1.4 bolt?
ISO 273: close fit 1.50 mm, normal fit 1.60 mm, loose fit 1.80 mm.
What does M1.4 x 0.3 mean?
A 1.4 mm nominal diameter ISO metric thread with a 0.3 mm pitch (coarse series).
https://whatsizeis.com/tap-drill/m1-4/