What size drill for an M1.6 tap?
Short answer: 1.25 mm drill (0.0492 in, 1.25 mm). That is D − P (1.6 − 0.35 mm) and gives about 77% thread. Closest inch drill: 3/64 in (0.0469 in, 90% thread).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
M1.6 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| 1.35 mm | 0.0531 | 1.35 | 55% |
| 1.3 mm | 0.0512 | 1.30 | 66% |
| 1.25 mmRecommended | 0.0492 | 1.25 | 77% |
Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate
Clearance hole for an M1.6 bolt
| Fit | Drill | Inch | mm |
|---|---|---|---|
| Close | 1.7 mm | 0.0669 | 1.70 |
| Normal | 1.8 mm | 0.0709 | 1.80 |
| Loose | 2 mm | 0.0787 | 2.00 |
ISO 273: fine (close), medium (normal) and coarse (loose) series.
M1.6 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 0.0630 | 1.60 |
| Pitch diameter (basic) | 0.0540 | 1.37 |
| Minor diameter, internal (basic) | 0.0481 | 1.22 |
| Pitch | 0.0138 | 0.35 |
Metric coarse (ISO), 0.35 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.
What you'll need
Other metric tap drill sizes

Questions
What size drill bit for an M1.6 tap?
1.25 mm (0.0492 in). That is the major diameter minus the pitch (1.6 − 0.35 mm) and gives about 77% thread.
Can I use an inch drill for an M1.6 tap?
Yes: 3/64 in drill (0.0469 in, 1.19 mm) gives about 90% thread.
What is the clearance hole for an M1.6 bolt?
ISO 273: close fit 1.70 mm, normal fit 1.80 mm, loose fit 2.00 mm.
What does M1.6 x 0.35 mean?
A 1.6 mm nominal diameter ISO metric thread with a 0.35 mm pitch (coarse series).
https://whatsizeis.com/tap-drill/m1-6/