What size drill for an M1.2 tap?
Short answer: 0.95 mm drill (0.0374 in, 0.95 mm). That is D − P (1.2 − 0.25 mm) and gives about 77% thread. Closest inch drill: #63 (0.0370 in, 80% thread).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
M1.2 tap drill sizes from 50% to 85% thread
Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate
Clearance hole for an M1.2 bolt
| Fit | Drill | Inch | mm |
|---|---|---|---|
| Close | 1.3 mm | 0.0512 | 1.30 |
| Normal | 1.4 mm | 0.0551 | 1.40 |
| Loose | 1.5 mm | 0.0591 | 1.50 |
ISO 273: fine (close), medium (normal) and coarse (loose) series.
M1.2 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 0.0472 | 1.20 |
| Pitch diameter (basic) | 0.0409 | 1.04 |
| Minor diameter, internal (basic) | 0.0366 | 0.93 |
| Pitch | 0.0098 | 0.25 |
Metric coarse (ISO), 0.25 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.
What you'll need
Other metric tap drill sizes

Questions
What size drill bit for an M1.2 tap?
0.95 mm (0.0374 in). That is the major diameter minus the pitch (1.2 − 0.25 mm) and gives about 77% thread.
Can I use an inch drill for an M1.2 tap?
Yes: #63 drill (0.0370 in, 0.94 mm) gives about 80% thread.
What is the clearance hole for an M1.2 bolt?
ISO 273: close fit 1.30 mm, normal fit 1.40 mm, loose fit 1.50 mm.
What does M1.2 x 0.25 mean?
A 1.2 mm nominal diameter ISO metric thread with a 0.25 mm pitch (coarse series).
https://whatsizeis.com/tap-drill/m1-2/