What size drill for an M2 tap?
Short answer: 1.6 mm drill (0.0630 in, 1.60 mm). That is D − P (2 − 0.4 mm) and gives about 77% thread. Closest inch drill: 1/16 in (0.0625 in, 79% thread).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
M2 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| 1.7 mm | 0.0669 | 1.70 | 58% |
| 1.65 mm | 0.0650 | 1.65 | 67% |
| 1.6 mmRecommended | 0.0630 | 1.60 | 77% |
Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate
Clearance hole for an M2 bolt
| Fit | Drill | Inch | mm |
|---|---|---|---|
| Close | 2.2 mm | 0.0866 | 2.20 |
| Normal | 2.4 mm | 0.0945 | 2.40 |
| Loose | 2.6 mm | 0.1024 | 2.60 |
ISO 273: fine (close), medium (normal) and coarse (loose) series.
M2 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 0.0787 | 2.00 |
| Pitch diameter (basic) | 0.0685 | 1.74 |
| Minor diameter, internal (basic) | 0.0617 | 1.57 |
| Pitch | 0.0157 | 0.40 |
Metric coarse (ISO), 0.4 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.
What you'll need
Other metric tap drill sizes

Questions
What size drill bit for an M2 tap?
1.60 mm (0.0630 in). That is the major diameter minus the pitch (2 − 0.4 mm) and gives about 77% thread.
Can I use an inch drill for an M2 tap?
Yes: 1/16 in drill (0.0625 in, 1.59 mm) gives about 79% thread.
What is the clearance hole for an M2 bolt?
ISO 273: close fit 2.20 mm, normal fit 2.40 mm, loose fit 2.60 mm.
What does M2 x 0.4 mean?
A 2 mm nominal diameter ISO metric thread with a 0.4 mm pitch (coarse series).
https://whatsizeis.com/tap-drill/m2/