What size drill for a 7/16-14 tap?

Short answer: letter U drill (0.3680 in, 9.35 mm). About 75% thread. Closest fractional drill: 3/8 in (67% thread). Metric: 9.30 mm (77%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
7/16-14 tapped hole drawn to scale: drill U, thread major diameter 11.11 mm1/4 in
Uletter U drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.3680
Millimetres
9.35
Thread
75%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

7/16-14 tap drill sizes from 50% to 85% thread

DrillInchmmThread
25/64"0.39069.9251%
W0.38609.8056%
V0.37709.5865%
3/8"0.37509.5367%
URecommended0.36809.3575%
23/64"0.35949.1384%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 7/16 screw

FitDrillInchmm
Close15/32"0.468811.91
Normal1/2"0.500012.70
Loose17/32"0.531313.49

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

7/16-14 thread dimensions

DimensionInchmm
Major diameter (basic)0.437511.11
Pitch diameter (basic)0.39119.93
Minor diameter, internal (basic)0.36029.15
Pitch (1/14 in)0.07141.81

Unified National Coarse (UNC), 14 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

7/16-14 UNC tapPlug tap for through holes, bottoming tap for blind holes
U drill bit0.3680 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 7/16-14 tap? Use a letter U drill — 0.3680 in (9.35 mm) — for about 75% thread. The closest fractional drill is 3/8 in (67% thread).
7/16-14 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 7/16-14 tap?

letter U drill (0.3680 in, 9.35 mm), about 75% thread. Fractional alternative: 3/8 in (67% thread).

What metric drill can I use for a 7/16-14 tap?

9.30 mm gives about 77% thread.

What is the clearance hole for a 7/16 screw?

Close fit: 15/32 in (0.4688 in); Normal fit: 1/2 in (0.5000 in); Loose fit: 17/32 in (0.5313 in).

What does 7/16-14 mean?

7/16 in major diameter with 14 threads per inch, Unified National Coarse (UNC).