What size drill for a 7/16-28 tap?

Short answer: letter Y drill (0.4040 in, 10.26 mm). About 72% thread. Closest fractional drill: 13/32 in (67% thread). Metric: 10.20 mm (77%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
7/16-28 tapped hole drawn to scale: drill Y, thread major diameter 11.11 mm1/4 in
Yletter Y drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.4040
Millimetres
10.26
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

7/16-28 tap drill sizes from 50% to 85% thread

DrillInchmmThread
Z0.413010.4953%
13/32"0.406310.3267%
YRecommended0.404010.2672%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 7/16 screw

FitDrillInchmm
Close15/32"0.468811.91
Normal1/2"0.500012.70
Loose17/32"0.531313.49

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

7/16-28 thread dimensions

DimensionInchmm
Major diameter (basic)0.437511.11
Pitch diameter (basic)0.414310.52
Minor diameter, internal (basic)0.398810.13
Pitch (1/28 in)0.03570.91

Unified National Extra Fine (UNEF), 28 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

7/16-28 UNEF tapPlug tap for through holes, bottoming tap for blind holes
Y drill bit0.4040 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 7/16-28 tap? Use a letter Y drill — 0.4040 in (10.26 mm) — for about 72% thread. The closest fractional drill is 13/32 in (67% thread).
7/16-28 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 7/16-28 tap?

letter Y drill (0.4040 in, 10.26 mm), about 72% thread. Fractional alternative: 13/32 in (67% thread).

What metric drill can I use for a 7/16-28 tap?

10.20 mm gives about 77% thread.

What is the clearance hole for a 7/16 screw?

Close fit: 15/32 in (0.4688 in); Normal fit: 1/2 in (0.5000 in); Loose fit: 17/32 in (0.5313 in).

What does 7/16-28 mean?

7/16 in major diameter with 28 threads per inch, Unified National Extra Fine (UNEF).