What is a 37/64 inch drill bit in mm?
Short answer: 0.5781 in = 14.68 mm. Closest metric drill: 14.5 mm (−0.0073 in). It is the tap drill for 5/8-18 UNF, 5/8-24 UNEF, 3/8-18 NPT.
Fractional drill
37/64"0.5781 in · 14.68 mm
Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.
Drill sizes close to 37/64"
| Drill | Type | Inch | mm | vs 37/64" |
|---|---|---|---|---|
| 33/64" | fractional | 0.5156 | 13.10 | −0.0625 |
| 17/32" | fractional | 0.5313 | 13.49 | −0.0469 |
| 35/64" | fractional | 0.5469 | 13.89 | −0.0313 |
| 14 mm | metric | 0.5512 | 14.00 | −0.0269 |
| 9/16" | fractional | 0.5625 | 14.29 | −0.0156 |
| 14.5 mm | metric | 0.5709 | 14.50 | −0.0073 |
| 37/64" | fractional | 0.5781 | 14.68 | – |
| 15 mm | metric | 0.5906 | 15.00 | +0.0124 |
| 19/32" | fractional | 0.5938 | 15.08 | +0.0156 |
| 39/64" | fractional | 0.6094 | 15.48 | +0.0313 |
| 15.5 mm | metric | 0.6102 | 15.50 | +0.0321 |
| 5/8" | fractional | 0.6250 | 15.88 | +0.0469 |
| 16 mm | metric | 0.6299 | 16.00 | +0.0518 |
Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate
What a 37/64" drill is used for
What you'll need
37/64 in jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Fractional drill set (1/64 in steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal
More fractional drills

Questions
What is a 37/64 in drill in inches?
0.5781 in.
What is a 37/64 in drill in mm?
14.68 mm (0.5781 × 25.4).
What metric drill is closest to 37/64 in?
14.5 mm drill (0.5709 in, 14.50 mm), smaller by 0.0073 in.
What tap uses a 37/64 in drill?
5/8-18 UNF, 5/8-24 UNEF, 3/8-18 NPT (recommended tap drills).
https://whatsizeis.com/drill/37-64-inch/