What size drill for a 5/8-11 tap?

Short answer: 17/32 in drill (0.5313 in, 13.49 mm). About 79% thread. Metric: 13.60 mm (76%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5/8-11 tapped hole drawn to scale: drill 17/32, thread major diameter 15.88 mm1/2 in
17/32"17/32 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.5313
Millimetres
13.49
Thread
79%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5/8-11 tap drill sizes from 50% to 85% thread

DrillInchmmThread
9/16"0.562514.2953%
35/64"0.546913.8966%
17/32"Recommended0.531313.4979%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 5/8 screw

FitDrillInchmm
Close43/64"0.671917.07
Normal11/16"0.687517.46
Loose47/64"0.734418.65

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5/8-11 thread dimensions

DimensionInchmm
Major diameter (basic)0.625015.88
Pitch diameter (basic)0.566014.38
Minor diameter, internal (basic)0.526613.38
Pitch (1/11 in)0.09092.31

Unified National Coarse (UNC), 11 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5/8-11 UNC tapPlug tap for through holes, bottoming tap for blind holes
17/32 in drill bit0.5313 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 5/8-11 tap? Use a 17/32 in drill — 0.5313 in (13.49 mm) — for about 79% thread.
5/8-11 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5/8-11 tap?

17/32 in drill (0.5313 in, 13.49 mm), about 79% thread.

What metric drill can I use for a 5/8-11 tap?

13.60 mm gives about 76% thread.

What is the clearance hole for a 5/8 screw?

Close fit: 43/64 in (0.6719 in); Normal fit: 11/16 in (0.6875 in); Loose fit: 47/64 in (0.7344 in).

What does 5/8-11 mean?

5/8 in major diameter with 11 threads per inch, Unified National Coarse (UNC).