What size drill for a 5/16-18 tap?

Short answer: letter F drill (0.2570 in, 6.53 mm). About 77% thread. Closest fractional drill: 17/64 in (65% thread). Metric: 6.60 mm (73%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5/16-18 tapped hole drawn to scale: drill F, thread major diameter 7.94 mm1/4 in
Fletter F drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2570
Millimetres
6.53
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5/16-18 tap drill sizes from 50% to 85% thread

DrillInchmmThread
I0.27206.9156%
H0.26606.7664%
17/64"0.26566.7565%
G0.26106.6371%
FRecommended0.25706.5377%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 5/16 screw

FitDrillInchmm
CloseQ0.33208.43
NormalT0.35809.09
Loose25/64"0.39069.92

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5/16-18 thread dimensions

DimensionInchmm
Major diameter (basic)0.31257.94
Pitch diameter (basic)0.27647.02
Minor diameter, internal (basic)0.25246.41
Pitch (1/18 in)0.05561.41

Unified National Coarse (UNC), 18 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5/16-18 UNC tapPlug tap for through holes, bottoming tap for blind holes
F drill bit0.2570 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 5/16-18 tap? Use a letter F drill — 0.2570 in (6.53 mm) — for about 77% thread. The closest fractional drill is 17/64 in (65% thread).
5/16-18 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5/16-18 tap?

letter F drill (0.2570 in, 6.53 mm), about 77% thread. Fractional alternative: 17/64 in (65% thread).

What metric drill can I use for a 5/16-18 tap?

6.60 mm gives about 73% thread.

What is the clearance hole for a 5/16 screw?

Close fit: Q (0.3320 in); Normal fit: T (0.3580 in); Loose fit: 25/64 in (0.3906 in).

What does 5/16-18 mean?

5/16 in major diameter with 18 threads per inch, Unified National Coarse (UNC).