What size drill for a 5/16-32 tap?

Short answer: 9/32 in drill (0.2813 in, 7.14 mm). About 77% thread. Metric: 7.20 mm (72%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5/16-32 tapped hole drawn to scale: drill 9/32, thread major diameter 7.94 mm1/4 in
9/32"9/32 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2813
Millimetres
7.14
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5/16-32 tap drill sizes from 50% to 85% thread

DrillInchmmThread
L0.29007.3755%
9/32"Recommended0.28137.1477%
K0.28107.1478%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 5/16 screw

FitDrillInchmm
CloseQ0.33208.43
NormalT0.35809.09
Loose25/64"0.39069.92

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5/16-32 thread dimensions

DimensionInchmm
Major diameter (basic)0.31257.94
Pitch diameter (basic)0.29227.42
Minor diameter, internal (basic)0.27877.08
Pitch (1/32 in)0.03130.79

Unified National Extra Fine (UNEF), 32 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5/16-32 UNEF tapPlug tap for through holes, bottoming tap for blind holes
9/32 in drill bit0.2813 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 5/16-32 tap? Use a 9/32 in drill — 0.2813 in (7.14 mm) — for about 77% thread.
5/16-32 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5/16-32 tap?

9/32 in drill (0.2813 in, 7.14 mm), about 77% thread.

What metric drill can I use for a 5/16-32 tap?

7.20 mm gives about 72% thread.

What is the clearance hole for a 5/16 screw?

Close fit: Q (0.3320 in); Normal fit: T (0.3580 in); Loose fit: 25/64 in (0.3906 in).

What does 5/16-32 mean?

5/16 in major diameter with 32 threads per inch, Unified National Extra Fine (UNEF).