What size drill for a 3/8-16 tap?
Short answer: 5/16 in drill (0.3125 in, 7.94 mm). About 77% thread. Metric: 8.00 mm (74%).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
3/8-16 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| Q | 0.3320 | 8.43 | 53% |
| 21/64" | 0.3281 | 8.33 | 58% |
| P | 0.3230 | 8.20 | 64% |
| O | 0.3160 | 8.03 | 73% |
| 5/16"Recommended | 0.3125 | 7.94 | 77% |
Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate
Clearance hole for a 3/8 screw
Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).
3/8-16 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 0.3750 | 9.53 |
| Pitch diameter (basic) | 0.3344 | 8.49 |
| Minor diameter, internal (basic) | 0.3073 | 7.81 |
| Pitch (1/16 in) | 0.0625 | 1.59 |
Unified National Coarse (UNC), 16 threads per inch. Basic dimensions from the ASME B1.1 formulas.
Same size, other threads
What you'll need
Other UNC tap drill sizes

Questions
What size drill bit for a 3/8-16 tap?
5/16 in drill (0.3125 in, 7.94 mm), about 77% thread.
What metric drill can I use for a 3/8-16 tap?
8.00 mm gives about 74% thread.
What is the clearance hole for a 3/8 screw?
Close fit: X (0.3970 in); Normal fit: 27/64 in (0.4219 in); Loose fit: 15/32 in (0.4688 in).
What does 3/8-16 mean?
3/8 in major diameter with 16 threads per inch, Unified National Coarse (UNC).
https://whatsizeis.com/tap-drill/3-8-16/