What size drill for a 3/8-32 tap?

Short answer: 11/32 in drill (0.3438 in, 8.73 mm). About 77% thread. Metric: 8.80 mm (70%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
3/8-32 tapped hole drawn to scale: drill 11/32, thread major diameter 9.53 mm1/4 in
11/32"11/32 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.3438
Millimetres
8.73
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

3/8-32 tap drill sizes from 50% to 85% thread

DrillInchmmThread
S0.34808.8467%
11/32"Recommended0.34388.7377%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 3/8 screw

FitDrillInchmm
CloseX0.397010.08
Normal27/64"0.421910.72
Loose15/32"0.468811.91

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

3/8-32 thread dimensions

DimensionInchmm
Major diameter (basic)0.37509.53
Pitch diameter (basic)0.35479.01
Minor diameter, internal (basic)0.34128.67
Pitch (1/32 in)0.03130.79

Unified National Extra Fine (UNEF), 32 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

3/8-32 UNEF tapPlug tap for through holes, bottoming tap for blind holes
11/32 in drill bit0.3438 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 3/8-32 tap? Use an 11/32 in drill — 0.3438 in (8.73 mm) — for about 77% thread.
3/8-32 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 3/8-32 tap?

11/32 in drill (0.3438 in, 8.73 mm), about 77% thread.

What metric drill can I use for a 3/8-32 tap?

8.80 mm gives about 70% thread.

What is the clearance hole for a 3/8 screw?

Close fit: X (0.3970 in); Normal fit: 27/64 in (0.4219 in); Loose fit: 15/32 in (0.4688 in).

What does 3/8-32 mean?

3/8 in major diameter with 32 threads per inch, Unified National Extra Fine (UNEF).