What size drill for a 12-32 tap?

Short answer: #13 drill (0.1850 in, 4.70 mm). About 76% thread. Closest fractional drill: 3/16 in (70% thread). Metric: 4.70 mm (76%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
12-32 tapped hole drawn to scale: drill #13, thread major diameter 5.49 mm1/8 in
#13#13 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1850
Millimetres
4.70
Thread
76%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

12-32 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#100.19354.9155%
#110.19104.8562%
#120.18904.8067%
3/16"0.18754.7670%
#13Recommended0.18504.7076%
#140.18204.6284%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #12 screw

FitDrillInchmm
CloseA0.23405.94
NormalB0.23806.05
LooseF0.25706.53

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

12-32 thread dimensions

DimensionInchmm
Major diameter (basic)0.21605.49
Pitch diameter (basic)0.19574.97
Minor diameter, internal (basic)0.18224.63
Pitch (1/32 in)0.03130.79

Unified National Extra Fine (UNEF), 32 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

12-32 UNEF tapPlug tap for through holes, bottoming tap for blind holes
#13 drill bit0.1850 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 12-32 tap? Use a #13 drill — 0.1850 in (4.70 mm) — for about 76% thread. The closest fractional drill is 3/16 in (70% thread).
12-32 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 12-32 tap?

#13 drill (0.1850 in, 4.70 mm), about 76% thread. Fractional alternative: 3/16 in (70% thread).

What metric drill can I use for a 12-32 tap?

4.70 mm gives about 76% thread.

What is the clearance hole for a #12 screw?

Close fit: A (0.2340 in); Normal fit: B (0.2380 in); Loose fit: F (0.2570 in).

What does 12-32 mean?

#12 screw size (0.2160 in major diameter) with 32 threads per inch, Unified National Extra Fine (UNEF).