What size drill for a 12-24 tap?

Short answer: #16 drill (0.1770 in, 4.50 mm). About 72% thread. Closest fractional drill: 11/64 in (82% thread). Metric: 4.50 mm (72%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
12-24 tapped hole drawn to scale: drill #16, thread major diameter 5.49 mm1/8 in
#16#16 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1770
Millimetres
4.50
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

12-24 tap drill sizes from 50% to 85% thread

DrillInchmmThread
3/16"0.18754.7653%
#130.18504.7057%
#140.18204.6263%
#150.18004.5767%
#16Recommended0.17704.5072%
#170.17304.3979%
11/64"0.17194.3782%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #12 screw

FitDrillInchmm
CloseA0.23405.94
NormalB0.23806.05
LooseF0.25706.53

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

12-24 thread dimensions

DimensionInchmm
Major diameter (basic)0.21605.49
Pitch diameter (basic)0.18894.80
Minor diameter, internal (basic)0.17094.34
Pitch (1/24 in)0.04171.06

Unified National Coarse (UNC), 24 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

12-24 UNC tapPlug tap for through holes, bottoming tap for blind holes
#16 drill bit0.1770 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 12-24 tap? Use a #16 drill — 0.1770 in (4.50 mm) — for about 72% thread. The closest fractional drill is 11/64 in (82% thread).
12-24 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 12-24 tap?

#16 drill (0.1770 in, 4.50 mm), about 72% thread. Fractional alternative: 11/64 in (82% thread).

What metric drill can I use for a 12-24 tap?

4.50 mm gives about 72% thread.

What is the clearance hole for a #12 screw?

Close fit: A (0.2340 in); Normal fit: B (0.2380 in); Loose fit: F (0.2570 in).

What does 12-24 mean?

#12 screw size (0.2160 in major diameter) with 24 threads per inch, Unified National Coarse (UNC).