What size drill for a 1/4-20 tap?

Short answer: #7 drill (0.2010 in, 5.11 mm). About 75% thread. Closest fractional drill: 13/64 in (72% thread). Metric: 5.10 mm (76%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1/4-20 tapped hole drawn to scale: drill #7, thread major diameter 6.35 mm1/8 in
#7#7 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2010
Millimetres
5.11
Thread
75%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1/4-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#30.21305.4157%
#40.20905.3163%
#50.20555.2269%
#60.20405.1871%
13/64"0.20315.1672%
#7Recommended0.20105.1175%
#80.19905.0579%
#90.19604.9883%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1/4 screw

FitDrillInchmm
CloseH0.26606.76
NormalJ0.27707.04
Loose19/64"0.29697.54

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1/4-20 thread dimensions

DimensionInchmm
Major diameter (basic)0.25006.35
Pitch diameter (basic)0.21755.53
Minor diameter, internal (basic)0.19594.98
Pitch (1/20 in)0.05001.27

Unified National Coarse (UNC), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1/4-20 UNC tapPlug tap for through holes, bottoming tap for blind holes
#7 drill bit0.2010 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 1/4-20 tap? Use a #7 drill — 0.2010 in (5.11 mm) — for about 75% thread. The closest fractional drill is 13/64 in (72% thread).
1/4-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1/4-20 tap?

#7 drill (0.2010 in, 5.11 mm), about 75% thread. Fractional alternative: 13/64 in (72% thread).

What metric drill can I use for a 1/4-20 tap?

5.10 mm gives about 76% thread.

What is the clearance hole for a 1/4 screw?

Close fit: H (0.2660 in); Normal fit: J (0.2770 in); Loose fit: 19/64 in (0.2969 in).

What does 1/4-20 mean?

1/4 in major diameter with 20 threads per inch, Unified National Coarse (UNC).