What size drill for a 1/4-32 tap?

Short answer: 7/32 in drill (0.2188 in, 5.56 mm). About 77% thread. Metric: 5.60 mm (73%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1/4-32 tapped hole drawn to scale: drill 7/32, thread major diameter 6.35 mm1/8 in
7/32"7/32 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2188
Millimetres
5.56
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1/4-32 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#10.22805.7954%
#20.22105.6171%
7/32"Recommended0.21885.5677%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1/4 screw

FitDrillInchmm
CloseH0.26606.76
NormalJ0.27707.04
Loose19/64"0.29697.54

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1/4-32 thread dimensions

DimensionInchmm
Major diameter (basic)0.25006.35
Pitch diameter (basic)0.22975.83
Minor diameter, internal (basic)0.21625.49
Pitch (1/32 in)0.03130.79

Unified National Extra Fine (UNEF), 32 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1/4-32 UNEF tapPlug tap for through holes, bottoming tap for blind holes
7/32 in drill bit0.2188 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 1/4-32 tap? Use a 7/32 in drill — 0.2188 in (5.56 mm) — for about 77% thread.
1/4-32 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1/4-32 tap?

7/32 in drill (0.2188 in, 5.56 mm), about 77% thread.

What metric drill can I use for a 1/4-32 tap?

5.60 mm gives about 73% thread.

What is the clearance hole for a 1/4 screw?

Close fit: H (0.2660 in); Normal fit: J (0.2770 in); Loose fit: 19/64 in (0.2969 in).

What does 1/4-32 mean?

1/4 in major diameter with 32 threads per inch, Unified National Extra Fine (UNEF).