What size drill for a 1-8 tap?

Short answer: 7/8 in drill (0.8750 in, 22.23 mm). About 77% thread. Metric: 22.50 mm (70%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-8 tapped hole drawn to scale: drill 7/8, thread major diameter 25.40 mm1/2 in
7/8"7/8 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.8750
Millimetres
22.23
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-8 tap drill sizes from 50% to 85% thread

DrillInchmmThread
29/32"0.906323.0258%
57/64"0.890622.6267%
7/8"Recommended0.875022.2377%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1 screw

FitDrillInchmm
Close1-3/64"1.046926.59
Normal1-7/64"1.109428.18
Loose1-3/16"1.187530.16

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-8 thread dimensions

DimensionInchmm
Major diameter (basic)1.000025.40
Pitch diameter (basic)0.918823.34
Minor diameter, internal (basic)0.864721.96
Pitch (1/8 in)0.12503.18

Unified National Coarse (UNC), 8 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-8 UNC tapPlug tap for through holes, bottoming tap for blind holes
7/8 in drill bit0.8750 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 1-8 tap? Use a 7/8 in drill — 0.8750 in (22.23 mm) — for about 77% thread.
1-8 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-8 tap?

7/8 in drill (0.8750 in, 22.23 mm), about 77% thread.

What metric drill can I use for a 1-8 tap?

22.50 mm gives about 70% thread.

What is the clearance hole for a 1 screw?

Close fit: 1-3/64 in (1.0469 in); Normal fit: 1-7/64 in (1.1094 in); Loose fit: 1-3/16 in (1.1875 in).

What does 1-8 mean?

1 in major diameter with 8 threads per inch, Unified National Coarse (UNC).