What size drill for a 1-20 tap?

Short answer: 61/64 in drill (0.9531 in, 24.21 mm). About 72% thread. Metric: 24.00 mm (85%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-20 tapped hole drawn to scale: drill 61/64, thread major diameter 25.40 mm1/2 in
61/64"61/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.9531
Millimetres
24.21
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
61/64"Recommended0.953124.2172%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1 screw

FitDrillInchmm
Close1-3/64"1.046926.59
Normal1-7/64"1.109428.18
Loose1-3/16"1.187530.16

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-20 thread dimensions

DimensionInchmm
Major diameter (basic)1.000025.40
Pitch diameter (basic)0.967524.58
Minor diameter, internal (basic)0.945924.03
Pitch (1/20 in)0.05001.27

Unified National Extra Fine (UNEF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-20 UNEF tapPlug tap for through holes, bottoming tap for blind holes
61/64 in drill bit0.9531 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 1-20 tap? Use a 61/64 in drill — 0.9531 in (24.21 mm) — for about 72% thread.
1-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-20 tap?

61/64 in drill (0.9531 in, 24.21 mm), about 72% thread.

What metric drill can I use for a 1-20 tap?

24.00 mm gives about 85% thread.

What is the clearance hole for a 1 screw?

Close fit: 1-3/64 in (1.0469 in); Normal fit: 1-7/64 in (1.1094 in); Loose fit: 1-3/16 in (1.1875 in).

What does 1-20 mean?

1 in major diameter with 20 threads per inch, Unified National Extra Fine (UNEF).