What size drill for a 1-1/2-6 tap?
Short answer: 1-11/32 in drill (1.3438 in, 34.13 mm). About 72% thread. Metric: 34.00 mm (75%).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
1-1/2-6 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| 1-25/64" | 1.3906 | 35.32 | 51% |
| 1-3/8" | 1.3750 | 34.93 | 58% |
| 1-23/64" | 1.3594 | 34.53 | 65% |
| 1-11/32"Recommended | 1.3438 | 34.13 | 72% |
| 1-21/64" | 1.3281 | 33.73 | 79% |
Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate
Clearance hole for a 1-1/2 screw
| Fit | Drill | Inch | mm |
|---|---|---|---|
| Close | 1-35/64" | 1.5469 | 39.29 |
| Normal | 1-5/8" | 1.6250 | 41.28 |
| Loose | 1-3/4" | 1.7500 | 44.45 |
Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).
1-1/2-6 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 1.5000 | 38.10 |
| Pitch diameter (basic) | 1.3917 | 35.35 |
| Minor diameter, internal (basic) | 1.3196 | 33.52 |
| Pitch (1/6 in) | 0.1667 | 4.23 |
Unified National Coarse (UNC), 6 threads per inch. Basic dimensions from the ASME B1.1 formulas.
Same size, other threads
What you'll need
Other UNC tap drill sizes

Questions
What size drill bit for a 1-1/2-6 tap?
1-11/32 in drill (1.3438 in, 34.13 mm), about 72% thread.
What metric drill can I use for a 1-1/2-6 tap?
34.00 mm gives about 75% thread.
What is the clearance hole for a 1-1/2 screw?
Close fit: 1-35/64 in (1.5469 in); Normal fit: 1-5/8 in (1.6250 in); Loose fit: 1-3/4 in (1.7500 in).
What does 1-1/2-6 mean?
1-1/2 in major diameter with 6 threads per inch, Unified National Coarse (UNC).
https://whatsizeis.com/tap-drill/1-1-2-6/