What size drill for a 1-1/2-18 tap?

Short answer: 1-29/64 in drill (1.4531 in, 36.91 mm). About 65% thread. Metric: 36.50 mm (87%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-1/2-18 tapped hole drawn to scale: drill 1-29/64, thread major diameter 38.10 mm1 in
1-29/64"1-29/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
1.4531
Millimetres
36.91
Thread
65%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-1/2-18 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-29/64"Recommended1.453136.9165%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-1/2 screw

FitDrillInchmm
Close1-35/64"1.546939.29
Normal1-5/8"1.625041.28
Loose1-3/4"1.750044.45

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-1/2-18 thread dimensions

DimensionInchmm
Major diameter (basic)1.500038.10
Pitch diameter (basic)1.463937.18
Minor diameter, internal (basic)1.439936.57
Pitch (1/18 in)0.05561.41

Unified National Extra Fine (UNEF), 18 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-1/2-18 UNEF tapPlug tap for through holes, bottoming tap for blind holes
1-29/64 in drill bit1.4531 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 1-1/2-18 tap? Use a 1-29/64 in drill — 1.4531 in (36.91 mm) — for about 65% thread.
1-1/2-18 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-1/2-18 tap?

1-29/64 in drill (1.4531 in, 36.91 mm), about 65% thread.

What metric drill can I use for a 1-1/2-18 tap?

36.50 mm gives about 87% thread.

What is the clearance hole for a 1-1/2 screw?

Close fit: 1-35/64 in (1.5469 in); Normal fit: 1-5/8 in (1.6250 in); Loose fit: 1-3/4 in (1.7500 in).

What does 1-1/2-18 mean?

1-1/2 in major diameter with 18 threads per inch, Unified National Extra Fine (UNEF).