What is a 1.25 mm drill bit in inches?

Short answer: 0.0492 in = 1.25 mm. Closest fractional drill: 3/64 in (−0.0023 in). It is the tap drill for M1.6 x 0.35.

Metric drill

1.25mm0.0492 in · 1.25 mm
1.25 mm drill bit (1.25 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
−0.0023 in
Closest number
−0.0027 in

Drill sizes close to 1.25 mm

DrillTypeInchmmvs 1.25 mm
#59number0.04101.04−0.0082
#58number0.04201.07−0.0072
#57number0.04301.09−0.0062
1.1 mmmetric0.04331.10−0.0059
#56number0.04651.18−0.0027
3/64"fractional0.04691.19−0.0023
1.25 mmmetric0.04921.25–
#55number0.05201.32+0.0028
#54number0.05501.40+0.0058
1.5 mmmetric0.05911.50+0.0098
#53number0.05951.51+0.0103
1/16"fractional0.06251.59+0.0133
1.6 mmmetric0.06301.60+0.0138

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 1.25 mm drill is used for

What you'll need

1.25 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 1.25 mm drill bit in inches? 1.25 mm drill = 0.0492 in = 1.25 mm. Closest fractional drill: 3/64 in (−0.0023 in). It is the tap drill for M1.6 x 0.35.
1.25 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 1.25 mm in inches?

1.25 mm = 0.0492 in (1.25 ÷ 25.4).

What fractional drill is closest to 1.25 mm?

3/64 in drill (0.0469 in, 1.19 mm), smaller by 0.0023 in.

What number drill is closest to 1.25 mm?

#56 drill (0.0465 in, 1.18 mm), smaller by 0.0027 in.

What tap uses a 1.25 mm drill?

M1.6 x 0.35 (recommended tap drill).