What is a 0.95 mm drill bit in inches?

Short answer: 0.0374 in = 0.95 mm. Closest fractional drill: 1/32 in (−0.0062 in). It is the tap drill for M1.2 x 0.25.

Metric drill

0.95mm0.0374 in · 0.95 mm
0.95 mm drill bit (0.95 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
−0.0062 in
Closest number
−0.0004 in

Drill sizes close to 0.95 mm

DrillTypeInchmmvs 0.95 mm
1/32"fractional0.03130.79−0.0062
#67number0.03200.81−0.0054
#66number0.03300.84−0.0044
#65number0.03500.89−0.0024
#64number0.03600.91−0.0014
#63number0.03700.94−0.0004
0.95 mmmetric0.03740.95–
#62number0.03800.97+0.0006
#61number0.03900.99+0.0016
1 mmmetric0.03941.00+0.0020
#60number0.04001.02+0.0026
#59number0.04101.04+0.0036
#58number0.04201.07+0.0046

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 0.95 mm drill is used for

What you'll need

0.95 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 0.95 mm drill bit in inches? 0.95 mm drill = 0.0374 in = 0.95 mm. Closest fractional drill: 1/32 in (−0.0062 in). It is the tap drill for M1.2 x 0.25.
0.95 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 0.95 mm in inches?

0.95 mm = 0.0374 in (0.95 ÷ 25.4).

What fractional drill is closest to 0.95 mm?

1/32 in drill (0.0313 in, 0.79 mm), smaller by 0.0062 in.

What number drill is closest to 0.95 mm?

#63 drill (0.0370 in, 0.94 mm), smaller by 0.0004 in.

What tap uses a 0.95 mm drill?

M1.2 x 0.25 (recommended tap drill).