What size drill for a 1-1/8-7 tap?

Short answer: 63/64 in drill (0.9844 in, 25.00 mm). About 76% thread. Metric: 25.00 mm (76%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-1/8-7 tapped hole drawn to scale: drill 63/64, thread major diameter 28.58 mm1/2 in
63/64"63/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.9844
Millimetres
25.00
Thread
76%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-1/8-7 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-1/32"1.031326.1951%
1-1/64"1.015625.8059%
1"1.000025.4067%
63/64"Recommended0.984425.0076%
31/32"0.968824.6184%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-1/8 screw

FitDrillInchmm
Close1-11/64"1.171929.77
Normal1-1/4"1.250031.75
Loose1-21/64"1.328133.73

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-1/8-7 thread dimensions

DimensionInchmm
Major diameter (basic)1.125028.58
Pitch diameter (basic)1.032226.22
Minor diameter, internal (basic)0.970424.65
Pitch (1/7 in)0.14293.63

Unified National Coarse (UNC), 7 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-1/8-7 UNC tapPlug tap for through holes, bottoming tap for blind holes
63/64 in drill bit0.9844 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 1-1/8-7 tap? Use a 63/64 in drill — 0.9844 in (25.00 mm) — for about 76% thread.
1-1/8-7 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-1/8-7 tap?

63/64 in drill (0.9844 in, 25.00 mm), about 76% thread.

What metric drill can I use for a 1-1/8-7 tap?

25.00 mm gives about 76% thread.

What is the clearance hole for a 1-1/8 screw?

Close fit: 1-11/64 in (1.1719 in); Normal fit: 1-1/4 in (1.2500 in); Loose fit: 1-21/64 in (1.3281 in).

What does 1-1/8-7 mean?

1-1/8 in major diameter with 7 threads per inch, Unified National Coarse (UNC).