What is a 49/64 inch drill bit in mm?

Short answer: 0.7656 in = 19.45 mm. Closest metric drill: 19.5 mm (+0.0021 in). It is the tap drill for 7/8-9 UNC, 13/16-20 UNEF.

Fractional drill

49/64"0.7656 in · 19.45 mm
49/64" drill bit (19.45 mm) drawn to scale with a scale bar2 in

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest metric
+0.0021 in

Drill sizes close to 49/64"

DrillTypeInchmmvs 49/64"
18 mmmetric0.708718.00−0.0570
23/32"fractional0.718818.26−0.0469
18.5 mmmetric0.728318.50−0.0373
47/64"fractional0.734418.65−0.0313
19 mmmetric0.748019.00−0.0176
3/4"fractional0.750019.05−0.0156
49/64"fractional0.765619.45–
19.5 mmmetric0.767719.50+0.0021
25/32"fractional0.781319.84+0.0156
20 mmmetric0.787420.00+0.0218
51/64"fractional0.796920.24+0.0313
20.5 mmmetric0.807120.50+0.0415
13/16"fractional0.812520.64+0.0469

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 49/64" drill is used for

What you'll need

49/64 in jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Fractional drill set (1/64 in steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More fractional drills

What is a 49/64 inch drill bit in mm? 49/64 in drill = 0.7656 in = 19.45 mm. Closest metric drill: 19.5 mm (+0.0021 in). It is the tap drill for 7/8-9 UNC, 13/16-20 UNEF.
49/64" drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is a 49/64 in drill in inches?

0.7656 in.

What is a 49/64 in drill in mm?

19.45 mm (0.7656 × 25.4).

What metric drill is closest to 49/64 in?

19.5 mm drill (0.7677 in, 19.50 mm), larger by 0.0021 in.

What tap uses a 49/64 in drill?

7/8-9 UNC, 13/16-20 UNEF (recommended tap drills).