What size drill for a 1/2-13 tap?

Short answer: 27/64 in drill (0.4219 in, 10.72 mm). About 78% thread. Metric: 10.80 mm (75%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1/2-13 tapped hole drawn to scale: drill 27/64, thread major diameter 12.70 mm1/4 in
27/64"27/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.4219
Millimetres
10.72
Thread
78%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1/2-13 tap drill sizes from 50% to 85% thread

DrillInchmmThread
7/16"0.437511.1163%
27/64"Recommended0.421910.7278%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1/2 screw

FitDrillInchmm
Close35/64"0.546913.89
Normal9/16"0.562514.29
Loose39/64"0.609415.48

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1/2-13 thread dimensions

DimensionInchmm
Major diameter (basic)0.500012.70
Pitch diameter (basic)0.450011.43
Minor diameter, internal (basic)0.416710.58
Pitch (1/13 in)0.07691.95

Unified National Coarse (UNC), 13 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1/2-13 UNC tapPlug tap for through holes, bottoming tap for blind holes
27/64 in drill bit0.4219 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 1/2-13 tap? Use a 27/64 in drill — 0.4219 in (10.72 mm) — for about 78% thread.
1/2-13 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1/2-13 tap?

27/64 in drill (0.4219 in, 10.72 mm), about 78% thread.

What metric drill can I use for a 1/2-13 tap?

10.80 mm gives about 75% thread.

What is the clearance hole for a 1/2 screw?

Close fit: 35/64 in (0.5469 in); Normal fit: 9/16 in (0.5625 in); Loose fit: 39/64 in (0.6094 in).

What does 1/2-13 mean?

1/2 in major diameter with 13 threads per inch, Unified National Coarse (UNC).